Serving the Dayton area  ·  (937) 949-5355  ·  Open Mon-Sun 7am-7pm
📞 (937) 949-5355 Free Quote

Metal Roofing in Fairborn, OH (45324) · Local Professionals

Dayton Metal Roofing · Fast response in Fairborn and the Dayton area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+279Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Fairborn is a town of older frame homes and Wright-Patterson-area ranches, and a lot of them are still wearing their original roofs. If you live off Dayton-Yellow Springs Road or in one of the neighborhoods near Wright State University, you know the look: low-slope shingle roofs, a few standing seam panels going up on newer builds, and gutters that take a beating every spring.

Homeowners in 45324 call us because we know how these roofs fail. The freeze-thaw cycles here work fasteners loose, and wind off the open fields around the base can peel a panel back in one storm. We are Dayton Metal Roofing, and we have been fixing and replacing roofs across the Fairborn area for years.

Metal Roofing in Fairborn (45324)

Fairborn sits on the flat ground of the Miami Valley, and that matters for roofing. The clay and limestone soil holds water after a heavy rain, so ice dams at the eaves are a real problem on the older homes. Many of the ranches near Wright-Patterson have low-pitch roofs that were shingled when they were built in the 1950s and 1960s, and those shingles are now at the end of their life. We see a lot of failed fasteners and separated seams on the metal roofs that are already here, especially on the older barns and shops out toward the edge of town. Our team knows how to work with the tight lots near the university and the wider lots in the subdivisions off Kauffman Avenue. We handle permits through the city and can coordinate with your HOA if you have one.

We have worked on everything from small repairs on a Cape Cod to full standing seam installations on newer homes. If you are in Fairborn and need a metal roof, we can give you a straight answer about what will work on your house.

Our services in Fairborn

How a Job Works in Fairborn

Step 1: You call us at (937) 949-5355 or fill out our form, and we set up a free on-site assessment. We look at the roof, the attic if we can get in, and the flashing around chimneys and skylights. We give you a written estimate with options, not pressure.

Step 2: Once you approve, we pull the permit from the city and schedule the work. On the tighter streets near downtown Fairborn, we plan for where the dumpster goes and how we get materials to the roof without blocking your neighbor's driveway. If your home is in a historic district or under an HOA, we make sure the panel profile and color are approved before we order anything.

Step 3: When we finish, we clean up every nail and scrap, and we walk the property with you. We do not leave until you are satisfied and you know how to reach us if something comes up later.

Pricing in Fairborn depends on the size and pitch of your roof, how many layers are already there, and how easy it is to get to. For a typical ranch home here, metal roof installation starts around $8 per square foot, and standing seam starts at $10. If you are replacing an old shingle roof, replacement starts at $9 per square foot, and going over existing shingles with a retrofit starts at $7. Repairs start at $450, and screw replacement or re-fastening starts at $750. We also do coatings from $2.50 per square foot, gutters from $9 per linear foot, and snow guards from $1,200. Every roof is different, so call us at (937) 949-5355 for a free estimate. We will give you a real number, not a range that changes later.

My ranch near Wright-Patterson has a low-pitch roof with old shingles. Can you install metal over them or do I need a full tear-off?
It depends on how many layers are there and what the code allows. In many cases we can do a metal roof over shingles retrofit, which saves you the cost of tear-off and disposal. We will check the decking and the existing layers during the free inspection and tell you which option makes sense for your home in 45324.
A storm just blew through Fairborn and lifted some panels on my roof. How fast can you get out?
We prioritize storm and wind damage calls. Call us at (937) 949-5355 and we will schedule a free inspection as soon as possible, usually within a day or two depending on the volume of calls. We can tarp active leaks and make temporary repairs to prevent further damage before we do the permanent fix.
What does a metal roof repair typically cost in Fairborn?
Most repairs start at $450, and that covers common issues like flashing gaps, failed fasteners, or small leaks. If we need to replace screws across the whole roof, that starts at $750. The final price depends on the size of the repair, the pitch of your roof, and how accessible it is. We give you a firm quote before we start.
Do I need a permit to replace my roof in Fairborn?
Yes, the city of Fairborn generally requires a permit for a full roof replacement or re-roof. The exact requirements and fees can vary, so we confirm with the city building department before we start. We handle the permit application for you as part of the job.
My neighbor's tree drops limbs on my roof and I am worried about the property line. What should I do?
If a limb from your neighbor's tree falls on your roof, your insurance typically handles the damage to your home. We can inspect and document the damage for your claim. If you are planning a new roof and your HOA has rules about color or style, we can help you get the approval before we order materials.
Are you fully insured for work on my Fairborn property?
Yes, we carry general liability insurance and workers' compensation coverage.
What maintenance should I do on my metal roof in Fairborn to prevent ice dams?
Keep your gutters clear in the fall, especially if you have maples or oaks nearby. Check the flashing around chimneys and skylights once a year. If you see snow building up at the eaves, do not chip at it with a metal tool. Call us for an inspection, and we can recommend snow guards or heating cables if ice dams are a recurring problem on your home.
Why choose us?

Trusted professionals in Dayton

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Dayton

All your work handled by qualified professionals in Dayton

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

279+ Verified Client Reviews in Dayton

⭐⭐⭐⭐⭐ 4.9/5 · 279 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Dayton · Response within 24h · No commitment · ☎ (937) 949-5355

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Dayton ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm