Serving the Dayton area  ·  (937) 949-5355  ·  Open Mon-Sun 7am-7pm
📞 (937) 949-5355 Free Quote

Metal Roofing in Kettering, OH (45429) · Local Professionals

Dayton Metal Roofing · Fast response in Kettering and the Dayton area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+279Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Kettering is a city of brick ranches and Cape Cods, many built in the 1950s and 60s with low-pitched shingle roofs that are now well past their prime. If you live near Lincoln Park or along Far Hills Avenue, you know the look: solid mid-century homes with roofs that take a beating from freeze-thaw cycles and summer hail.

Homeowners in Kettering (45429) call Dayton Metal Roofing because we understand these older homes and the specific challenges they face. From the tight lots near Southdale to the tree-lined streets off Stroop Road, we have seen it all. Our team provides honest assessments and metal roofing solutions that last.

Metal Roofing in Kettering (45429)

Kettering's terrain is mostly flat with some gentle slopes, and the soil is a mix of glacial clay and limestone. That means drainage can be tricky, especially on older properties where grading may have settled over the decades. Many homes have mature trees, including sugar maples and oaks, whose limbs can damage roofs during storms. The low-pitched roofs common in Kettering are prone to ice damming in winter, and the freeze-thaw cycles we get here can cause shingles to crack and fail. We often recommend metal roof over shingles (retrofit) for these homes because it adds a durable layer without the expense of a full tear-off, and it is allowed by code as long as there are not too many existing layers. For homes with more complex rooflines or historic features, a full replacement with standing seam or metal shingles might be the better choice.

Our team has been serving Kettering and the surrounding Dayton area for years, and we know the local building department requirements. We also understand the aesthetic concerns of neighborhoods like Oakwood and Grafton Hill, where historic district design review may apply. Whether you need a simple repair or a complete new roof, we bring experience and local knowledge to every job.

Our services in Kettering

How a Job Works in Kettering

Step 1: Give us a call at (937) 949-5355 or fill out our online form to schedule a free on-site assessment. We will inspect your roof, discuss your options, and provide a written estimate. We will also check for any signs of damage that might be covered by insurance and help you document it.

Step 2: Once you approve the estimate, we will schedule the work and handle the permits with the City of Kettering. For homes in historic districts or HOAs, we will coordinate any necessary approvals. On the day of installation, our crew will protect your landscaping and keep the site tidy. We work efficiently, especially on tight lots where access can be a challenge, and we always follow manufacturer specifications to ensure your warranty stays valid.

Step 3: After the job is done, we do a thorough cleanup, including magnet sweeping for nails. We walk through the finished roof with you, answer any questions, and make sure you are completely satisfied. We leave your property clean and your new roof ready to protect your home for decades.

Pricing for metal roofing in Kettering depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, and metal roof over shingles at $7. For repairs, most leak fixes start around $450, and screw replacement or re-fastening starts at $750. We also offer free estimates for storm damage inspections and commercial projects. To get an accurate price for your home, call us at (937) 949-5355. We will provide a detailed, no-obligation estimate and explain all your options.

My Kettering ranch has a low-pitch roof that gets ice dams every winter. Will a metal roof help?
Yes, metal roofs can significantly reduce ice damming because they shed snow more easily and have fewer places for water to back up. However, proper insulation and ventilation in your attic are also critical. We can assess your whole roof system and recommend solutions like snow guards or improved insulation to keep ice dams at bay.
A storm just knocked a limb onto my roof in Kettering. Can you come out quickly?
We prioritize storm damage calls and offer free inspections. Call us at (937) 949-5355, and we will schedule a visit as soon as possible. We can tarp any active leaks and provide a detailed estimate for repairs, and we will help you document the damage for your insurance claim if needed.
What does a typical metal roof replacement cost for a 1,500-square-foot home in Kettering?
For a home that size, a full replacement with a standard metal roof might range from $12,000 to $18,000, depending on the material and roof complexity. Metal roof over shingles could be less, starting around $10,500. These are rough estimates; we provide exact pricing after a free on-site evaluation.
Do I need a permit for a metal roof in Kettering, and how long does it take?
Yes, roofing permits are typically required for replacements and some repairs. The City of Kettering Building Department handles permits, and processing times vary. We handle the permit application for you and schedule inspections as required. We stay up to date on local codes, including rules about how many layers of shingles can be covered.
My HOA requires approval for roof color. Can you help with that?
Absolutely. We are familiar with many HOAs in the Kettering area and can provide color samples and documentation for your submission. We will work with your HOA to ensure the chosen metal roof meets their guidelines, and we can adjust our schedule to accommodate any approval timelines.
Are you fully insured for roofing work in Kettering?
Yes, we carry full general liability insurance and workers' compensation coverage. Your home and our team are protected throughout the project.
How often should I have my metal roof inspected in Kettering?
We recommend an inspection every two to three years, and after any major storm. Kettering's freeze-thaw cycles and summer hail can loosen fasteners or cause minor damage that is easy to fix if caught early. We offer free inspections and can spot issues before they become costly leaks.
Why choose us?

Trusted professionals in Dayton

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Dayton

All your work handled by qualified professionals in Dayton

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

279+ Verified Client Reviews in Dayton

⭐⭐⭐⭐⭐ 4.9/5 · 279 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Dayton · Response within 24h · No commitment · ☎ (937) 949-5355

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Dayton ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm