Serving the Dayton area  ·  (937) 949-5355  ·  Open Mon-Sun 7am-7pm
📞 (937) 949-5355 Free Quote

Metal Roofing in Huber Heights, OH (45424) · Local Professionals

Dayton Metal Roofing · Fast response in Huber Heights and the Dayton area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+279Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Huber Heights is a city of practical, hardworking neighborhoods, and its roofs show it. The ranches and split-levels built from the 1960s through the 1990s around Brandt Pike and the Dayton International Airport corridor are now at the age where original shingles are failing, and homeowners are tired of patching the same leaks every spring.

We are Dayton Metal Roofing, and we work these streets regularly. From the split-levels off Chambersburg Road to the brick ranches near Carriage Hill MetroPark, we know how these homes are built and what they need. If you live in ZIP 45424 and your roof is telling you it is done, call us at (937) 949-5355 for a straight answer and a free estimate.

Metal Roofing in Huber Heights (45424)

Huber Heights sits on the flat, glacial clay and limestone ground of the Miami Valley, and that matters for your roof. The soil holds water after heavy rain, and freeze-thaw cycles in winter work on fasteners and seams. Most of the housing stock here is 1960s to 1990s ranch and split-level construction with low-pitched roofs, which are prone to ice dams at the eaves and wind-lifted shingles after the tornado-warned thunderstorms that roll through in summer. Many of these homes also have mature sugar maples and oaks close to the house, so falling limbs and leaf debris in gutters are a constant issue. When we replace a roof here, we often find the original decking has soft spots near the chimneys and skylights, and we plan for that.

Our team has worked on hundreds of roofs across Huber Heights and the surrounding Dayton area, from simple re-roofs to full standing seam installations. We understand the local building department's permit process and the inspection timeline, and we know which panel profiles and colors work well on these homes without making them look out of place on the street.

Our services in Huber Heights

How a Job Works in Huber Heights

Step 1: You call us at (937) 949-5355 or request a free estimate online. We schedule an on-site assessment at your Huber Heights home, usually within a few days. We inspect the roof, attic, flashing, and gutters, and we take photos so you can see exactly what we see. You get a written estimate with options, not pressure.

Step 2: Once you approve, we pull the required roofing permit from the City of Huber Heights and schedule the work. On tight lots in the older subdivisions off Brandt Pike, we plan material delivery and dumpster placement carefully so we do not block your neighbor's driveway. If your home is in an HOA, we coordinate the design approval before ordering panels. Most residential re-roofs take one to three days, depending on weather and roof complexity.

Step 3: We clean up every day, and we do a final walkthrough with you. We use a magnet sweep for nails, haul away all old materials, and make sure your gutters and downspouts are clear. We do not consider the job done until you have walked the property with us and signed off.

Pricing for metal roofing in Huber Heights depends on the size and pitch of your roof, the condition of the decking, access, and the material you choose. As a ballpark, metal roof replacement starts at $9 per square foot, standing seam starts at $10 per square foot, and metal roof over shingles (retrofit) starts at $7 per square foot. A typical ranch home in 45424 might fall in the $12,000 to $22,000 range for a full replacement, but we confirm that with a free on-site estimate. Repairs like leak fixes start at $450, and screw replacement or re-fastening starts at $750. We give you a clear written price before any work begins. Call (937) 949-5355 to schedule your free estimate.

My split-level in Huber Heights has ice dams every winter. Will a metal roof fix that?
Ice dams are common on the low-pitched ranches and split-levels here because warm air escapes through the attic and melts snow that refreezes at the eaves. A metal roof with proper underlayment and ventilation helps, but we also check your attic insulation and air sealing. In many cases, adding ice guards and improving ventilation solves the problem. We will assess your specific roof and tell you what will actually work.
A storm just blew some panels loose on my roof in Huber Heights. How fast can you get out?
We prioritize storm damage calls in Huber Heights and the surrounding area. Call us at (937) 949-5355 and we will schedule an inspection as soon as possible, often the same day or next. We can tarp or secure the roof to prevent further water damage, and we document everything for your insurance claim. We never promise coverage, but we provide the photos and reports your adjuster needs.
What does a typical metal roof replacement cost for a ranch home in 45424?
For a standard ranch home in Huber Heights, most full metal roof replacements fall between $12,000 and $22,000, depending on square footage, roof pitch, decking condition, and whether you choose corrugated panels, standing seam, or stone-coated steel. Retrofits over existing shingles can be less. We give you a detailed written estimate after a free inspection, so you know the exact price before we start.
Do I need a permit from the City of Huber Heights for a metal roof?
Yes, a roofing permit is typically required for a full replacement or re-roof in Huber Heights, and the requirements can vary. We handle the permit application and coordinate the inspection with the city building department as part of your project. We always defer to the local building department for final rules, and we make sure your job meets current code.
My HOA has rules about roof colors. Can you help with approval?
We work with HOAs in Huber Heights regularly. Before ordering materials, we provide color samples and specification sheets you can submit to your HOA board. We can also adjust the panel profile to meet design guidelines. If there is a property line issue with a neighbor, we follow local setback rules and keep communication open so the project stays on track.
Are you fully insured for work at my Huber Heights home?
Yes. We carry general liability insurance and workers' compensation coverage for every job.
What maintenance does a metal roof need in Huber Heights?
Metal roofs are low maintenance, but in our climate you should check fasteners and seams annually, especially after winter freeze-thaw cycles. Keep gutters clear of leaves from the mature trees common in Huber Heights, and trim branches away from the roof. We offer inspection and maintenance plans, including screw replacement and re-fastening, to keep your roof performing for decades.
Why choose us?

Trusted professionals in Dayton

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Dayton

All your work handled by qualified professionals in Dayton

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

279+ Verified Client Reviews in Dayton

⭐⭐⭐⭐⭐ 4.9/5 · 279 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Dayton · Response within 24h · No commitment · ☎ (937) 949-5355

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Dayton ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm